Description
D12. 2 Channel Amplifier 3U. 2 x 1200W 4Ω / 750W 8Ω.
| Controls and indicators |
|
| POWER |
Mains power switch |
| SCROLL/EDIT |
Digital rotary encoder |
| Display |
Liquid Crystal Display (LCD)/120 x 32 pixel |
| ISP, GR, OVL A/B |
LED indicators |
| Digital Signal Processing |
|
| Equalizer |
4-band PEQ/Notch |
| Latency analog and digital inputs |
0.3 msec. |
| Delay setting |
0.3 – 340 msec with 0.1 msec detents |
| Configurations |
current d&b loudspeakers and linear mode |
| Function switches |
d&b loudspeaker specific circuits |
| Frequency generator |
Pink noise or Sine wave |
| Sampling rate |
96 kHz/27 Bit ADC/24 Bit DAC |
| Connectors |
|
| INPUT ANALOG (A1, A2) |
3 pin XLR female |
| ANALOG LINK (A1, A2) |
3 pin XLR male |
| INPUT DIGITAL (D1, D2) |
3 pin XLR female AES 3 |
| DIGITAL LINK (Output) |
3 pin XLR male |
| Sampling rate |
48 kHz/96 kHz |
| Sampling Digital AES/EBU |
48 kHz/96 kHz |
| OUT CHANNEL A/B |
NL4, optional EP5/NL8 |
| REMOTE |
2 x RJ 45 parallel, CAN-Bus |
| SERVICE |
SUB-D9 female |
| Mains connector |
powerCON® |
| Data (linear setting with subsonic filter) |
|
Maximum output power per channel (THD + N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms |
2 x 1200/750 W
2 x 1600/800 W |
| S/N ratio (unweighted, RMS) |
> 110 dBr |
| Power supply |
|
| Type |
Autosensing switch mode power supply |
| Rated mains voltage high range |
200 – 230 V, 50 – 60 Hz |
| Rated mains voltage low range |
100 – 120 V, 50 – 60 Hz |
| Dimensions, weight |
|
| Dimensions (H x W x D) |
3 RU x 19″ x 353 mm/13.9″ |
| Weight |
13 kg/29 lb |
