Description
D6. 2 Channel Amplifier 2U. 2 x 600W 4Ω / 350W 8Ω.
Controls and indicators |
|
POWER |
Mains power switch |
SCROLL/EDIT |
Digital rotary encoder |
Display |
Liquid Crystal Display (LCD)/120 x 32 pixel |
ISP, GR, OVL A/B |
LED indicators |
Digital Signal Processing |
|
Equalizer |
4-band PEQ/Notch |
Latency analog and digital inputs |
0.3 msec. |
Delay setting |
0.3 – 340 msec with 0.1 msec detents |
Configurations |
current d&b loudspeakers and linear mode except 2-Way Active, V-Series and B2-SUB |
Function switches |
d&b loudspeaker specific circuits |
Frequency generator |
Pink noise or Sine wave |
Sampling rate |
96 kHz/27 Bit ADC/24 Bit DAC |
Connectors |
|
INPUT ANALOG (A1, A2) |
3 pin XLR female |
ANALOG LINK (A1, A2) |
3 pin XLR male |
INPUT DIGITAL (D1, D2) |
3 pin XLR female AES 3 |
DIGITAL LINK (Output) |
3 pin XLR male |
Sampling rate |
48 kHz/96 kHz |
Sampling Digital AES/EBU |
48 kHz/96 kHz |
OUT CHANNEL A/B |
NL4 |
REMOTE |
2 x RJ 45 parallel, CAN-Bus |
SERVICE |
USB type B |
Mains connector |
powerCON® |
Data (linear setting with subsonic filter) |
|
Maximum output power per channel (THD + N < 0.5%, all channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms |
2 x 600/350 W
2 x 600/350 W |
S/N ratio (unweighted, RMS) |
> 110 dBr |
Power supply |
|
Type |
Autosensing switch mode power supply with active Power Factor Correction (PFC) |
Rated mains voltage high range |
208 – 240 V, 50 – 60 Hz |
Rated mains voltage low range |
100 – 127 V, 50 – 60 Hz |
Dimensions, weight |
|
Dimensions (H x W x D) |
2 RU x 19″ x 353 mm/13.9″ |
Weight |
8 kg/17.6 lb |